Lighting Accessories

Ballast Kit, Sodium, 400W Multi-Volt Best choice for DIY grow room aficionados! Whether you are wiring your own first ballast setup or performing a...

Hydrofarm's Light Riser Hanging System makes it easy to hang reflectors, filters or other equipment. Simply secure the quick release carabiner clip...

German-made Wieland RST power connection with 8' 14AWG WT 110-120V Plug, 5-15P, Harness. Allows for quick attachment at the fixture for easy instal...

Hydrofarm offers a complete line of industry-standard commercial Wieland cable harnesses. German made Wieland "plug & play" harnesses provide t...

German-made Wieland RST power connection with 8' 16AWG WT 208-240V Plug, 6-15P, Harness. Allows for quick attachment at the fixture for easy instal...

German-made Wieland RST power connection with 8' 18AWG WT locking 277V, L7-20P, Harness. Allows for quick attachment at the fixture for easy instal...

This CMh cordset is easy to install and works with all PGZ18 base T9/T12 ceramic halide lamps. Based on our popular All System Cordset design, it c...

Designed to easily mount your Phantom fixture from Unistrut or greenhouse C-channel strut for secure, level suspension. Accommodates trusses up to ...

All new for 2020, the Advanced Quantum PAR Meter provides accurate and cost-effective measurement for all light sources used to grow plants.  The P...

Hydrofarm offers a complete line of PHOTOBIO•X LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connecti...

PHOTOBIO-V 208-240V Harness Hydrofarm offers a complete line of PHOTOBIO•V LED fixture cable harnesses. These "plug & play" harnesses provide t...

PHOTOBIO-V 277V Harness Hydrofarm offers a complete line of PHOTOBIO•V LED fixture cable harnesses. These "plug & play" harnesses provide the b...

Xtrasun ballast power cord. Can be used as replacement power cord. 8' 120V 16/3 power cord, NEMA 5-15P plug, IEC C13 non-notched receptacle. Shi...

Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops a...

10 RPM IntelliDrive motor (LR3.5ID9) w/6' rail plus mounting hardware For a rectangular growing area, a linear lamp moving system is preferable. Th...

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at...

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the ...

RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to...

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included. Shipping We...

These Tent Hanging Brackets will enable you to hang and run a LightRail 3.0, 3.5 or 4.0 light mover in your grow tent. They are straightforward an...

Normally a component in the LightRail Complete Kit, this 6' auxiliary rail can be used for extending the travel length of your LightRail setup by ...

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A La...

Adjust-a-drive motor w/6' rail plus mounting hardware The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualal...

Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable...

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustab...

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may n...

Auxiliary Trolley for the Light Rail 5. Shipping Weight 0.40 lbs. Package Dimensions 3.50L x 3.25W x 3.75H

LightRail 5 Commercial Drive 4 RPM kit From its “triple duty” extruded aluminum track, “wide and stable” carriage with “steel-on-steel” carrier be...

6' Add A Lamp Slave (6' Push Rod/6' Rail). Move your lights back and forth across your growing area with a light mover. It helps to increase your l...

The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to...

Includes: LRAAI3.5 - A six-foot rail and a six-foot pushrod LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie) ...

Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension ...

Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

EXTREME DUTY TROLLEY WHEELS, for LightRail 3.0, 3.5 and 4.0. A suggested upgrade item for moving multiple lights and/or overweight loads such as he...

8' PHOTO•LOC 0-10V Communication cable kit provides the ability to send low voltage signal to a fixture to control light output and photo-period wh...

PHOTOBIO MX 16' Remote Driver Kit allows the power supply to be mounted remotely separate from light emitting portion. Contain: (2) 16' WT IP65 DC...

Designed to easily mount your Phantom DE fixture from Unistrut or greenhouse C-channel strut for level suspension.Accommodates trusses up to 2 1/2"...